Knowledge

Can Refurbished LED Fiber Optic Handpieces Match New Performance for Surgical Visibility?

Posted on by allwill-admin

An LED fiber optic handpiece is a surgical or aesthetic instrument with integrated fiber optic illumination and LED light source, delivering 30–50% superior visibility compared to traditional halogen models. Key benefits include reduced eye strain, enhanced accuracy in posterior and delicate restorations, faster procedure times, minimal heat emission, and extended clinical durability—critical for high-volume aesthetic practices requiring precision and operator comfort.

Check: Handpieces

What Is an LED Fiber Optic Handpiece and How Does It Work?

An LED fiber optic handpiece combines an integrated LED light source with a fiber optic delivery system, transmitting light directly to the treatment or surgical site in real time. Unlike halogen models that concentrate heat at the bulb, fiber optic cables distribute cool, focused illumination without thermal buildup. This design enables clinicians to maintain clear visibility during extended procedures while minimizing operator fatigue.

In aesthetic medicine, LED fiber optic handpieces are essential for laser treatment preparation, verification of treatment zones, post-operative inspection, and precision work in delicate facial areas. The fiber optic core acts as a light conduit, preserving beam intensity across distances while the LED source provides consistent, color-accurate illumination—ideal for assessing skin tone, texture, and treatment response in real time.

The mechanics are straightforward: electricity powers the LED, light travels through the fiber optic bundle, and a lens at the handpiece tip focuses the beam. This simplicity translates to durability, fewer moving parts, and reliable performance across thousands of procedure cycles.

How Do LED Fiber Optics Improve Surgical Accuracy and Clinical Outcomes?

Superior illumination directly reduces procedural errors and accelerates clinical decision-making. The 30–50% visibility improvement over halogen systems enables clinicians to identify subtle skin conditions, verify laser treatment boundaries, and assess post-procedure healing with confidence. Faster assessment cycles shorten chair time, improving clinic throughput and patient satisfaction scores.

Eye strain reduction is measurable: extended procedures under poor lighting increase operator fatigue, reducing precision and increasing risk of complications. LED fiber optics deliver consistent, flicker-free illumination at comfortable brightness levels, enabling longer work sessions without visual degradation. Many practitioners report improved ergonomics and reduced end-of-day exhaustion when transitioning from halogen to LED systems.

In high-volume aesthetic clinics, these efficiency gains compound: treating more patients per day with fewer errors directly correlates to improved financial performance and clinical reputation. Practices upgrading to LED handpieces typically report faster treatment cycles and higher patient confidence in procedure outcomes.

What Are the Key Innovations in Modern LED Handpiece Technology?

The evolution from halogen to LED represents a significant technology shift. Modern LED handpieces consume 60–70% less energy than halogen equivalents, operate at dramatically cooler temperatures, and deliver lifespan ratings exceeding 10,000 hours compared to halogen’s 500-hour average. Advanced fiber optic coatings improve light transmission efficiency, ensuring maximum illumination reaches the clinical site with minimal signal loss.

Check: A Trusted Partner in Energy-Based Medical Aesthetics

Ergonomic refinements have made contemporary LED models lighter, more balanced, and easier to maneuver during extended procedures. Heat dissipation improvements eliminate the thermal stress that historically limited halogen handpiece utility in surgical environments. Premium models now integrate digital imaging compatibility, enabling real-time documentation and treatment verification directly through the handpiece optics.

From a sustainability perspective, the extended lifespan of LED systems reduces replacement cycles and capital expenditure over device lifetime. A practice utilizing a single LED handpiece for 10,000+ hours versus multiple halogen units across 5,000 total hours realizes substantial savings in procurement, maintenance, and waste management.

Also check:  Best Treatment for Cellulite: How DEKA ONDA Pro Coolwaves Transform Skin
Feature LED Fiber Optic Halogen Fiber Optic
Light Output Improvement Baseline (30–50% superior to halogen) Baseline standard
Energy Consumption 60–70% lower Baseline
Operating Temperature Cool, minimal heat emission High thermal output
Lifespan 10,000+ hours ~500 hours
Operator Fatigue (Extended Sessions) Minimal Significant eye strain
Maintenance Frequency Lower Frequent bulb replacement

Why Do Refurbished LED Fiber Optic Handpieces Offer Reliable Performance?

A widespread misconception holds that refurbished equipment represents compromised quality. In reality, refurbished handpieces undergo rigorous recalibration and testing protocols that restore performance to factory specifications. When processed by certified biomedical facilities, refurbished devices match new-unit reliability without premium pricing.

ALLWILL’s Smart Center represents the world’s largest independent biomedical service facility, executing multi-point inspection protocols specifically designed for LED fiber optic systems. Every refurbished handpiece undergoes optical fiber integrity verification, LED calibration to original specifications, and comprehensive performance testing. This ensures consistent output, color accuracy, and operational reliability equivalent to new devices.

The certification advantage extends beyond technical validation. Refurbished handpieces processed through Smart Center come with transparent warranty terms and full disclosure of service history. Clinics gain the performance reliability of new equipment at refurbished pricing—typically 40–60% below new-unit cost—without expensive recertification fees or locked-in service contracts.

From a practical standpoint, refurbished LED handpieces have proven performance histories. Unlike new units, which carry inherent unknown-failure risks in early operation, refurbished devices have been stress-tested and validated. When certified by professional biomedical providers, they represent lower procurement risk combined with lower capital expense.

How Can LED Handpiece Trade-In Programs Reduce Your Capital Expenditure?

New LED fiber optic handpieces typically cost $2,500–$6,000 per unit. For mid-market aesthetic clinics operating multiple treatment stations, equipment budgets become a significant constraint. Trade-in programs address this by enabling clinics to upgrade visibility and accuracy while reducing total capital spend by 20–40%.

ALLWILL’s Lasermatch platform functions as a brand-agnostic device sourcing and procurement engine, streamlining access to new and refurbished handpieces with full transparency. Clinics submit current equipment details through an online form; ALLWILL calculates fair trade-in valuations and applies credits toward new or refurbished LED purchases. Combined with refurbished pricing, this approach enables equipment upgrades that would otherwise exceed budget approval thresholds.

Trade-in programs also address lifecycle management concerns. Rather than operating aging halogen systems until catastrophic failure forces emergency procurement, clinics can plan phased upgrades through Lasermatch. Scheduled transitions prevent downtime, ensure staff continuity, and allow training on new systems before deprecating old equipment.

MET, ALLWILL’s vendor management system, connects clinics with fully vetted technicians for seamless installation and training. This integrated approach—sourcing through Lasermatch, installation via MET—eliminates hidden costs and ensures the upgrade process enhances rather than disrupts clinical workflows.

Scenario New LED Purchase (No Trade-In) Refurbished LED with Trade-In Credit Capital Savings
Single Handpiece Upgrade $4,500 $2,800 (after $1,200 trade-in credit) 37.8%
Three-Unit Clinic Expansion $13,500 $8,100 (after $3,600 combined trade-in credits) 40%
Five-Unit Multi-Station Setup $22,500 $13,500 (after $6,000 combined credits) 40%

Which LED Fiber Optic Handpiece Models Best Fit Your Practice?

Selection criteria depend on case complexity, procedure frequency, durability requirements, and budget. Premium brands like NSK deliver exceptional reliability and advanced optics, justifying higher investment for high-volume surgical centers. Mid-range options from manufacturers such as Bien-Air balance performance with affordability, suiting general aesthetic practices. Entry-level models work well for secondary treatment stations or practices prioritizing budget control.

Also check:  Open pricing medical devices: Fotona, Thermage and the global second-hand market in 2026

ALLWILL’s brand-agnostic consultative approach recognizes that the “best” handpiece isn’t necessarily the most expensive. Clinics with moderate patient volume, staff skill levels, and budget constraints often achieve superior ROI with certified refurbished mid-range models than with new premium units. The key is matching specifications to your specific workflow, case mix, and financial targets.

Factors to evaluate include light output consistency, fiber optic diameter (affecting illumination field size), ergonomic balance for your clinical environment, and warranty terms. ALLWILL’s procurement team can access 30+ major brands—including Alma, Candela, DEKA, Fotona, Lumenis, and others—enabling comparisons aligned to your clinical and financial priorities rather than vendor margins.

What Best Practices Extend LED Handpiece Lifespan and Maximize ROI?

Preventive maintenance is foundational. Dust and residue accumulation on fiber optic tips reduces light transmission by 10–20%, necessitating regular cleaning with appropriate solvents and techniques. LED alignment checks ensure beam consistency; misalignment reduces effective illumination even when LED output remains stable.

Operational discipline also matters: avoiding thermal shock through gradual cool-down cycles, proper storage in climate-controlled environments, and adherence to manufacturer maintenance protocols preserve fiber optic integrity and LED lifespan. Many premature failures result from environmental stress rather than component wear.

ALLWILL’s MET vendor network provides scheduled maintenance and troubleshooting support. If handpiece illumination dims, becomes inconsistent, or emits unusual heat, Smart Center recalibration often resolves performance drift without requiring replacement. Maintaining service records—especially for refurbished units—protects warranty coverage and preserves resale value when upgrading equipment.

How Does ALLWILL Solve Your LED Handpiece Procurement Challenge?

Clinics typically face a procurement dilemma: capital constraints versus performance needs, compounded by uncertainty about refurbishment reliability and hidden service fees. Vendor lock-in through expensive service contracts further complicates equipment decisions. ALLWILL’s integrated platform ecosystem addresses each challenge directly.

The Smart Center ensures refurbished reliability through multi-point inspection, optical verification, and LED calibration to new-device specifications—without expensive recertification fees. Lasermatch eliminates vendor lock-in by offering brand-agnostic sourcing across 30+ major aesthetic and medical device manufacturers, with transparent pricing and custom trade-in valuations. MET connects clinics with fully vetted technicians for installation and training, ensuring smooth transitions without hidden costs.

ALLWILL’s philosophy—”We Don’t Sell, We Solve”—means procurement decisions align with your business metrics, not sales quotas. Whether you need a premium new LED handpiece, a certified refurbished unit, or a phased multi-station upgrade strategy, ALLWILL functions as your neutral equipment partner. The company covers the complete device lifecycle: sourcing, inspection, refurbishment, warranty, and trade-in programs—all backed by 15+ years of Smart Center operations and 570+ knowledge base resources.

ALLWILL Expert Views

“We’ve calibrated over 500 LED fiber optic handpieces across 20+ international brands through our Smart Center operations. The most common misconception is that refurbished equipment is second-tier—it absolutely isn’t. A refurbished handpiece recalibrated to factory specifications performs identically to a new device at 40–60% lower cost. The real ROI conversation isn’t ‘new versus refurbished’—it’s ‘Which handpiece matches your case complexity, staff expertise, and clinic volume targets?’ We offer brand-agnostic consultations because not every practice needs a $6,000 premium model. Some clinics achieve superior financial outcomes with a certified $2,200 refurbished unit and the savings reinvested in staff training or additional treatment stations. We align your equipment investment to your actual business model, not to inflated margins.”

ALLWILL Expert Views

— ALLWILL Smart Center and Procurement Team

Conclusion

LED fiber optic handpieces are now the clinical standard for surgical visibility and procedural efficiency in aesthetic medicine. They deliver 30–50% superior illumination, operate cool and efficiently, and sustain 10,000+ hour lifespans—directly improving clinical outcomes and operator comfort.

Also check:  AVANOS RF Probes CRKA-17-75-5.5 vs PMP-22-100C-SU Procurement Guide

However, clinics face real procurement barriers: capital constraints, uncertainty about refurbishment reliability, and risk of vendor lock-in through expensive service contracts. Refurbished equipment offers a pathway to precision technology at accessible pricing, but only when certified by qualified biomedical facilities with transparent processes.

ALLWILL solves this through integrated platforms: Smart Center certification ensures refurbished reliability equivalent to new devices without recertification fees; Lasermatch provides brand-agnostic sourcing and trade-in programs reducing capital spend by 20–40%; and MET connects clinics with vetted technicians for seamless installation and training. This ecosystem enables mid-market aesthetic practices to upgrade to surgical-grade LED visibility while optimizing equipment ROI and maintaining financial flexibility.

Whether your clinic is launching its first LED handpiece or scaling a multi-station upgrade, ALLWILL functions as your neutral procurement partner—matching equipment specifications to your clinical workflow and financial targets, not to sales quotas. Contact ALLWILL today for a brand-agnostic LED fiber optic handpiece consultation: info@allwillgroup.com or WhatsApp +852 6589 2977. Office hours: Monday–Friday, 8:30 AM–5:00 PM UTC.

Frequently Asked Questions

Can a refurbished LED fiber optic handpiece perform as well as a new one?

Yes. When refurbished by a certified biomedical facility like ALLWILL’s Smart Center, LED fiber optic handpieces undergo rigorous testing, optical fiber integrity verification, and LED calibration to factory specifications. Performance matches new units without premium pricing, backed by transparent warranty terms and full service history disclosure.

How much can I save by trading in my old handpiece for a refurbished LED model?

Trade-in programs typically reduce capital expenditure by 20–40%, depending on your current equipment’s condition and resale value. ALLWILL’s Lasermatch platform calculates custom trade-in credits applied toward new or refurbished purchases. Combined with refurbished pricing, clinics upgrade visibility while staying within budget constraints.

What’s the difference between LED and halogen fiber optic handpieces?

LED handpieces deliver 30–50% superior visibility, consume 60–70% less energy, emit minimal heat, and sustain 10,000+ hour lifespans versus halogen’s approximately 500-hour rating. LEDs reduce operator eye strain during extended sessions and are the modern standard for surgical accuracy in aesthetic practices.

Are there hidden fees when buying a refurbished LED handpiece from ALLWILL?

No. ALLWILL’s philosophy is “We Don’t Sell, We Solve”—there are no expensive recertification fees, no locked-in service contracts, and all costs are transparent upfront. Installation and training via MET-vetted technicians are coordinated with full fee disclosure before purchase.

How do I know if my LED handpiece needs servicing or replacement?

Watch for dimming light output, inconsistent illumination patterns, or increased heat emission—signs your handpiece needs Smart Center inspection. Many issues resolve through cleaning or realignment rather than replacement, extending equipment ROI. ALLWILL’s MET network can schedule maintenance checks and troubleshooting support.

allwill-admin

联系我们|Contact Form

TERMS AND CONDITIONS 

These Terms and Conditions (these “Terms”), together with the attached or accompanying quote page (the “Quote,” collectively, this “Agreement”), exclusively govern the sale by Healthcare Markets, Inc., a Delaware corporation doing business as “Powered by MRP” (“MRP”), and the purchase and use by the buyer set forth on the Quote (“Buyer”), of the equipment (the“Equipment”) and/or services (the “Services”).

        1.  EQUIPMENT AVAILABILITY. Equipment offered for sale by MRP is subject to availability. MRP shall not be liable to Buyer in case of stock outage or unavailability of the Equipment. MRP reserves the right to change the equipment offered for sale at any time and without notice to Buyer. Availability of equipment may be determined when an order is placed, and, if unavailable, MRP will inform Buyer of such unavailability, offer other available equipment as substitution or cancel the order. Such cancelled order will be refunded by MRP to Buyer, except for an order for a Special Order Product, which cannot be cancelled once the order is placed.

        2.  PRICES. Written price quotations on the Quote shall last for ten (10) days from the date issued and then automatically expire, and quoted prices do not include taxes, freight, handling, duty, insurance or other similar charges, which Buyer must pay unless waived in writing by MRP or a valid tax exemption certificate is provided to MRP. Notwithstanding the foregoing, all published prices may be changed by MRP at any time without notice to Buyer.

        3.  TERMS OF PAYMENT. Unless otherwise agreed to on the Quote or in writing by MRP, prepayment in full is required, by bank transfer, cash, credit card or certified check, and where partial pre-payment is permitted, such payment shall be nonrefundable with the balance due net thirty (30) days from the date of invoice. MRP reserves the right to modify or revoke any credit previously extended. Past due balances shall be subject to a service charge of one and one-half percent (1.5%) per month, not to exceed the maximum amount permitted by applicable law. Buyer agrees to pay all fees, charges or other sums payable hereunder, including collection fees incurred, with no right of set-off or reduction of any nature unless approved in writing by an MRP corporate officer (an “MRP Officer”). Buyer hereby grants, and MRP reserves, a purchase money security interest in the Equipment purchased, and in any proceeds thereof, to secure Buyer’s payment obligations hereunder. Buyer shall cooperate fully with MRP to execute such documents and accomplish such filings and/or recordings as MRP may deem necessary for the protection of its interests in the Equipment furnished to Buyer, and in the event Buyer does not aid within a reasonable time after MRP asks Buyer to do so, Buyer hereby authorizes and appoints MRP as Buyer’s attorney-in-fact to execute, deliver and file at any time, any financing statement and/or take any other action permitted by applicable law to perfect, enforce, continue and amend MRP’s security interest in any jurisdiction deemed appropriate by MRP. Buyer agrees that upon nonpayment of any charges due to MRP, MRP may cancel or delay delivery of the Equipment and/or suspend any applicable service coverage, which may resume only when MRP receives payment in full, and the warranty period will continue to run during such time of nonpayment although warranty service will not be available.

        4.  SHIPMENT AND DELIVERY. Delivery dates are estimated, and partial deliveries are allowed. MRP shall not be liable for or in respect of any loss or damage arising from any delay in filling any order, failure to deliver or delay in delivery. No delay in the shipment or delivery of any Equipment relieves Buyer of its obligations under this Agreement, including, without limitation, accepting delivery of any remaining installment(s) of the Equipment, if applicable. Buyer must pay for, and hold MRP harmless from, all shipping, delivery, and insurance expenses unless otherwise agreed in writing by an MRP Officer or otherwise indicated on the Quote. MRP will not assume any liability if MRP selects the shipping methods nor will any carrier be deemed to be MRP’s agent. “Time is of the essence” terms will not apply to orders accepted by MRP. Title and risk of loss of the Equipment shall pass to Buyer, and delivery shall be deemed completed, when the Equipment is delivered to Buyer’s address. Should loss or damage in transit occur, Buyer’s payment obligations will not be affected. Buyer is liable for all costs for MRP’s holding or storing of the Equipment if delivery is delayed by Buyer or at Buyer’s request. If delivery is delayed over thirty (30) days, MRP may, at its option and upon notice to Buyer, cancel that and all future deliveries without further liability or obligation of any kind.

        5.  FORCE MAJEURE. MRP shall not be responsible for delays or failure to render or service any Equipment and/or perform any Service due to any cause beyond MRP’s control, including, but not limited to: (a) acts of God; (b) flood, fire, earthquake, epidemic, pandemic or explosion; (c) war, invasion, hostilities (whether war is declared or not), terrorist threats or act, riot or other civil unrest; (d) government order, law or actions; (e) embargoes or blockades in effect on or after the date of this Agreement; (f) national or regional emergency; (g) strikes, labor stoppages or slowdowns or other industrial disturbances; and (h) telecommunication breakdowns, power outages or shortages, lack of warehouse or storage space, inadequate transportation services or inability or delay in obtaining supplies of adequate or suitable material (each, a “Force Majeure Event”). Any delivery date may be extended, at MRP’s sole discretion, to the extent of any delay resulting from any Force Majeure Event.

        6.  ACCEPTANCE; INSPECTION. Except for Special Order Products, Buyer shall inspect all Equipment upon delivery and within forty-eight (48) hours of delivery to Buyer shall give written notice to MRP of any error or claim that any Equipment does not conform to the terms of this Agreement; any claims not made within such period shall be deemed waived and released, with the Equipment being accepted by Buyer. Except as provided under this Section 6 and Section 7 hereof, all sales of Equipment to Buyer are made on a one-way basis, and Buyer has no right to return Equipment purchased under this Agreement to MRP. Subject to the warranty set forth in Section 8(c)(iv), Services are deemed to be accepted by Buyer upon completion of their performance by MRP.

        7.  CANCELLATION CHARGES AND RETURNED EQUIPMENT POLICY. Returns and cancellations are not permitted without written approval by an MRP Officer, which shall be made in such MRP Officer’s sole discretion. If approved, MRP will issue a return merchandise authorization number, which Buyer must include in the returned packaging, and Buyer must pay MRP either a (a) twenty percent (20%) restocking charge on the purchase price of the item if Buyer’s written request for return or cancellation is received by MRP’s headquarters after MRP’s original shipment of the Equipment or (b) a ten percent (10%) cancellation damages charge if Buyer’s request was received before said shipment. The foregoing charges are agreed upon, not as a penalty, but because of the difficulty of computing actual damages, and until the applicable charge is paid and the Equipment has been received back by MRP in new condition, no refund will be given. This document or copies hereof may be filed with the appropriate authorities as a financing statement to pursue such charges. In no case will shipping and freight costs be refunded. Removed, replaced or substituted equipment and parts (collectively, “Returned Equipment”) shall become MRP’s property, with title and ownership transferring to MRP upon the earlier of its return or replacement, with MRP owing no other obligations on the Returned Equipment. Buyer hereby agrees to indemnify, defend and hold harmless MRP Indemnitees from any claims, costs, losses, attorneys’ fees and expenses related to any third-party attempts to claim ownership of the Returned Equipment or dispute any trade-in, removal, substitution or replacement, and the remaining provisions shall continue in full force and effect.

        8.  MRP’S WARRANTIES, IF ANY.

(a) Equipment Sold “As Is.” UNLESS OTHERWISE STATED ON THE QUOTE OR IN A WRITING SIGNED BY AN MRP OFFICER, BUYER AGREES THAT THE EQUIPMENT SOLD IN THIS AGREEMENT IS BEING SOLD ON AN “AS IS,” “AS AVAILABLE” BASIS, SUBJECT TO SECTIONS 8(c) AND 9, AND HAVE NO WARRANTIES OR REPRESENTATIONS OF ANY KIND, WHETHER IMPLIED OR ARISING BY LAW, STATUTE OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, NON-INFRINGEMENT, WORKMANLIKE MANNER, QUALITY, ACCURACY, TITLE, AND/OR IMPLIED FROM A COURSE OF DEALING OR PERFORMANCE USAGE IN TRADE.

(b) Special Order Product. If this Agreement includes the sale of a product that MRP does not currently have or typically keep in stock, in MRP’s sole determination, but is acquired from a third party specifically for Buyer (a “Special Order Product”), then Buyer agrees that (i) Buyer, at its sole discretion, has made the selection of such Special Order Product, (ii) such Special Order Product is being acquired by MRP solely at the request of Buyer, (iii) no representation, warranty or guarantee has been made by MRP with respect to such Special Order Product, (iv) the obligation of Buyer to pay MRP for the Special Order Product is absolute and unconditional, and (v) Buyer waives and releases MRP from all claims, damages and losses arising out of such Special Order Product. Special Order Products carry no right to inspection before or after delivery, and MRP is not responsible for examining or evaluating such Special Order Products. MRP makes no warranty about Special Order Products and offerings of the third party (including description of the Special Order Product). MRP does not assume any responsibility or liability for the actions, product and content of all these and any other third parties. If there are any problems with any Special Order Product, Buyer must contact the manufacturer of such Special Order Product for assistance.

(c) Limited Warranties, If Any.

(i) If the Quote expressly states that the Equipment has a warranty for a certain time (a “Warranty Period”), then MRP warrants that the Equipment shall be in good working order under normal use for the Warranty Period, which Warranty Period shall commence from the date of delivery to Buyer (the “Delivery Date”), unless otherwise approved by an MRP Officer in writing, except for the following: (A) New (not used or pre-owned) Equipment that is to be serviced by MRP: if the Quote is silent, warranted to be in good working order under normal use for one hundred eighty (180) days from the Delivery Date; (B) Used Equipment sold refurbished by MRP: if the Quote is silent, warranted to be in good working order under normal use for thirty (30) days from the Delivery Date; (C) Consumable/disposable Equipment: if the Quote is silent, warranted to have been shipped from MRP in functional condition, and no additional warranty shall apply; no service shall be provided either. These items should be inspected for obvious damage, subject to Section 6 and 8(e), and MRP’s obligation under this warranty and this Section 8(c)(i)(C) is limited to replacement of the Equipment; and (D) New (not used or pre-owned) Equipment that is to be serviced by the manufacturer: if the Quote is silent, MRP makes no warranty for any such Equipment. Buyer’s sole warranty for any such Equipment, if any, shall be the original manufacturer’s warranty, which MRP agrees to pass on to Buyer, as applicable. (ii) For the limited warranties of Section 8(c)(i), including exceptions (A) and (B), but not (C) or this (D), Buyer is entitled to telephone, e-mail and video technical assistance and, subject to Sections 8(d) and 8(e), repair or replacement of such Equipment, in MRP’s sole discretion, should the Equipment become inoperative through normal use during the Warranty Period. Loaner equipment is not provided, but if so arranged by MRP, Buyer shall pay MRP the cash list price of any unreturned loaner equipment provided by MRP within seven (7) days of a written demand from MRP. (iii) Repair or replacement under any limited warranty of Equipment may be with parts or products that are new, used or refurbished, carrying the same limited warranty for the remaining term of the original item. Repairs or replacements shall not interrupt, extend or prolong the term of the warranty. (iv) For Services purchased under this Agreement, MRP warrants that the Services shall be performed using competent personnel in a professional manner in accordance with generally recognized industry standards for similar services. Subject to Sections 6 and 8(e) herein, if any Service was not performed in accordance with the aforementioned warranty, then MRP shall, in its sole discretion, either (A) repair or re-perform the applicable Service, or (B) credit or refund the price of such Service at the pro rata contract rate.

(d) Exclusions. MRP reserves the right, without liability, to void all warranties and remedies, including any obligation to service, repair, replace or otherwise remedy defects, errors or failures of the Equipment due to the occurrence of any of these events, and MRP shall be in no way responsible for: (i) handling, maintenance or use in a manner that is inconsistent with and/or contrary to the original manufacturer’s or MRP’s recommended procedures and/or instructions, including, without limitation, use of or with an unauthorized third-party good or part; (ii) any failure or damage resulting from negligence, alteration, modification or relocation of the Equipment by Buyer, its employees, agents or representatives; (iii) attempted or actual unauthorized dismantling, disassembling, service, repair, addition or change of the Equipment, including, without limitation, changing the serial number or shot count; (iv) abnormal wear and tear, including, without limitation, use under abnormal conditions (e.g., unclean, dusty, or exposure to extreme electromagnetic radiation, temperature or humidity); or (v) damage or failure of the Equipment due to a Force Majeure Event or a problem in the premises of the Equipment. In any of the above situations, or for any Equipment that has no warranty, MRP has sole discretion to service the Equipment, at Buyer’s expense, at MRP’s then-in-effect rates for service, labor, travel, shipping and materials.

(e) Notice and Inspection. The limited warranties contained in this Section 8 are made on condition that immediate written notice of any noncompliance with the Equipment’s and/or the Service’s warranty be given to MRP, and provided that MRP’s inspection reveals that Buyer’s claim is valid under the terms of such warranty.

        9.  DISCLAIMERS; NO OTHER WARRANTY. EXCEPT TO THE EXTENT AS PROVIDED IN SECTION 8(c)(i)(D), BUYER ACKNOWLEDGES THAT MRP IS NOT BOUND BY ANY WARRANTY THAT MAY BE SET FORTH IN A MANUFACTURER’S WRITTEN MATERIALS THAT WOULD HAVE APPLIED HAD BUYER PURCHASED THE EQUIPMENT DIRECTLY FROM THE MANUFACTURER IN ITS UNUSED STATE. BUYER ACKNOWLEDGES THAT BUYER HAS NOT RELIED UPON ANY WARRANTY OTHER THAN AS SET FORTH IN THIS AGREEMENT. IN ADDITION, BUYER ALSO HEREBY ACKNOWLEDGES AND AGREES THAT ANY ORAL OR WRITTEN STATEMENTS CONCERNING USE AND REGULATION OF MEDICAL DEVICES SOLD BY MRP ARE AND SHALL BE CONSTRUED AS FOR INFORMATIONAL PURPOSES ONLY AND WITHOUT WARRANTY OR ASSURANCE BY MRP AS TO THEIR ACCURACY OR VALIDITY. MRP ALSO HEREBY DISCLAIMS ANY AND ALL WARRANTIES REGARDING OTHER MEDICAL CARE OR HELP, INCLUDING THE SELECTION OF AESTHETIC AND MEDICAL PROCEDURES AND PRODUCTS FOR, OR CARE OF, PATIENTS. THE LIMITED WARRANTIES OF THIS AGREEMENT, IF APPLICABLE TO ANY EQUIPMENT OR SERVICE FURNISHED UNDER THIS AGREEMENT, CONSTITUTE THE ONLY WARRANTIES MADE WITH RESPECT TO THE EQUIPMENT AND/OR SERVICE AND ANY DEFECT, DEFICIENCY OR NONCONFORMITY. TO THE EXTENT PERMITTED BY LAW, SUCH WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, ANY EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE.

        10.  LIMITATION OF LIABILITY. NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THIS AGREEMENT, UNDER NO CIRCUMSTANCES SHALL MRP BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR SPECIAL DAMAGES, ARISING FROM, RELATED TO OR CAUSED, DIRECTLY OR INDIRECTLY, WHETHER FORESEEABLE OR NOT, BY THE EQUIPMENT AND/OR THE SERVICES, THE USE OR INABILITY TO USE THE EQUIPMENT, THE RESULTS GENERATED FROM THE EQUIPMENT AND/OR THE SERVICES, THIS AGREEMENT, ANY OTHER ACT OR OMISSION OF MRP, OR BASED UPON ANY OTHER LEGAL THEORY. IN NO EVENT SHALL MRP BE LIABLE FOR ANY LOSSES OF REVENUE, USE, BUSINESS OPPORTUNITY, PROFIT, SAVINGS OR ANY OTHER DAMAGES DUE TO ANY CAUSE WHATSOEVER, EVEN IF MRP OR ITS AGENTS HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. THE FOREGOING IS A SEPARATE, ESSENTIAL TERM OF THIS AGREEMENT, AND SHALL BE EFFECTIVE UPON THE FAILURE OF ANY REMEDY, EXCLUSIVE OR NOT. IN NO EVENT WILL MRP’S TOTAL LIABILITY UNDER THIS AGREEMENT EXCEED THE PURCHASE PRICE ACTUALLY PAID TO MRP BY BUYER FOR THE EQUIPMENT AND/OR THE SERVICES GIVING RISE TO THE CLAIM FOR WHICH DAMAGES ARE BEING SOUGHT. NO SUIT OR ACTION MAY BE BROUGHT BY BUYER, ITS SHAREHOLDERS, DIRECTORS, MANAGERS, EMPLOYEES OR AGENTS FOR ANY BREACH OF THIS AGREEMENT MORE THAN ONE (1) YEAR AFTER THE ACCRUAL OF SUCH CAUSE OF ACTION. IT IS AGREED THAT MRP’S LIABILITY IS SO LIMITED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BUYER ASSUMES ALL RISK AND LIABILITY FOR THE RESULTS OBTAINED BY THE USE OF ANY EQUIPMENT IN THE PRACTICE OF ANY PROCESS, WHETHER IN TERMS OF OPERATING COSTS, GENERAL EFFECTIVENESS, SUCCESS OR FAILURE, AND REGARDLESS OF ANY ORAL OR WRITTEN STATEMENTS MADE BY MRP, BY WAY OF TECHNICAL ADVICE OR OTHERWISE, RELATED TO THE USE OF THE EQUIPMENT.

        11.  BUYER’S REPRESENTATIONS AND WARRANTIES. Buyer represents and warrants to MRP that: (a) Buyer is duly organized, validly existing, and in good standing in the jurisdiction of Buyer’s formation; (b) Buyer is duly qualified to do business and is in good standing in every jurisdiction in which such qualification is required; (c) Buyer has the full right, power, and authority to enter into this Agreement and to perform Buyer’s obligations under this Agreement; (d) the execution of this Agreement by the person whose signature is set forth at the end hereof has been duly authorized by all necessary corporate action of Buyer; (e) when executed and delivered by each of MRP and Buyer, this Agreement will constitute the legal, valid and binding obligation of Buyer, enforceable against Buyer in accordance with its terms; (f) Buyer is in compliance with all applicable laws relating to this Agreement, the Equipment and the operation of Buyer’s business; (g) Buyer is not insolvent and is paying all of its debts as they become due; and (h) all financial information that Buyer has provided to MRP is true and accurate and fairly represents Buyer’s financial condition.

        12. PROPRIETARY RIGHTS.

(a) Ownership. No sale shall be construed as granting to Buyer any license or other right in, or to, any of MRP’s (i) patents; (ii) trademarks; (iii) internet domain names, whether or not trademarks, registered by any authorized private registrar or governmental authority, web addresses, web pages, websites and URLs; (iv) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, technical data, data files, and databases and other specifications and documentation; (v) trade secrets; (vi) environmental or other testing applicable to the Equipment and/or the Services; and (vii) industrial and other intellectual property rights, and all rights, interests, and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the laws of any jurisdiction throughout in any part of the world (collectively, the “Intellectual Property Rights”).

(b) Prohibited Acts. Buyer shall not (i) take any action that might interfere with any of MRP’s rights in or to Intellectual Property Rights, including MRP’s ownership or exercise thereof; (ii) challenge any right, title, or interest of MRP in or to the Intellectual Property Rights; (iii) make any claim or take any action adverse to MRP’s ownership of the Intellectual Property Rights; (iv) register or apply for registrations, anywhere in the world, for MRP’s trademarks or any other trademark that is similar to MRP’s trademarks or that incorporates MRP’s trademarks in whole or in confusingly similar part; (v) use any mark, anywhere that is confusingly

similar to MRP’s trademarks in whole or in confusingly similar part; (vi) engage in any action that tends to disparage, dilute the value of or reflect negatively on the Equipment and/or the Services or any of MRP’s trademarks; (vii) misappropriate any of MRP’s trademarks for use as a domain name without prior written consent from MRP; or (viii) alter, obscure or remove any of MRP’s trademarks, or trademark or copyright notices or any other proprietary rights notices placed on the

Equipment, marketing materials or other materials that MRP may provide.

        13.  CONFIDENTIAL INFORMATION. Without the prior written consent of MRP,Buyer, directly or indirectly, shall not disclose (and will direct its directors, shareholders, employees and agents not to disclose) any Confidential Information. The term “Confidential Information” means any information of or relating to MRP or the Equipment and/or the Services not generally known to the public (other than as a result of disclosure in violation of this Agreement) in spoken, printed, electronic or any other form or medium, including, but not limited to, business processes, practices, methods, policies, plans, publications, documents, research, operations, services, strategies, techniques, agreements, contracts, transactions, potential transactions, know-how, trade secrets, databases, manuals, records, supplier information, financial information, accounting information, legal information, marketing information, pricing information, payroll information, personnel information, and supplier lists.

        14.  NON-SOLICITATION. Buyer agrees not to solicit or hire any personnel of MRP involved with the delivery of the Services during the provision of such Services and for twelve (12) months after the completion of such Services; provided, however, that Buyer may hire individuals employed by MRP who, without other solicitation, respond to advertisements or solicitations aimed at the general public.

        15.  EQUITABLE REMEDIES. Buyer acknowledges and agrees that (a) a breach or threatened breach by Buyer of any of its obligations under Sections 13 or 14 would give rise to irreparable harm to MRP for which monetary damages would not be an adequate remedy and (b) in the event of a breach or a threatened breach by Buyer of any such obligations, MRP shall, in addition to any and all other rights and remedies that may be available to MRP at law, at equity, or otherwise in respect of such breach, be entitled to equitable relief, including a temporary restraining order, an injunction, specific performance, and any other relief that may be available from a court of competent jurisdiction, without any requirement to post a bond or other security, and without any requirement to prove actual damages or that monetary damages will not afford an adequate remedy. Buyer agrees that Buyer will not oppose or otherwise challenge the appropriateness of equitable relief or the entry by a court of competent jurisdiction of an order granting equitable relief, in either case, consistent with the terms of this Section 15.

        16.  INDEMNIFICATION. Buyer agrees to indemnify, defend and hold harmless MRP and its directors, shareholders, employees and agents (collectively, “MRP Indemnitees”) against any liability, damage, loss or expense incurred by or imposed in connection with any claims, suits, actions, demands or judgments arising out of (a) any breach or non-fulfillment of any representation, warranty or covenant set forth in this Agreement by Buyer or its directors, managers, employees or agents (collectively, “Buyer’s Agents”); (b) any negligent act or omission or willful misconduct of Buyer or Buyer’s Agents in connection with this Agreement; (c) any bodily injury, death of any person or damage to real or tangible personal property caused by Buyer or Buyer’s Agents, including the use of unauthorized parts in or service of the Equipment; (d) any failure by Buyer or Buyer’s Agents to comply with any applicable laws; (e) any fraud or other intentional acts by Buyer or Buyer’s Agents; and (f) the use or operation of the Equipment, including, without limitation, any medical and/or surgical procedures performed by Buyer, and any of Buyer’s Agents, using the Equipment unless said damages are determined by a court of competence jurisdiction to be solely by the gross negligence of MRP or solely as result of a breach by MRP of the limited warranties contained herein.

        17.  DEFAULTS; REMEDIES. Notwithstanding anything herein to the contrary, should Buyer fail to pay for the order or any other amount, in whole or in part, when due or perform its other obligations under this Agreement or as otherwise mutually agreed in writing between Buyer and MRP (each, a “Default”), then MRP may take any and all actions available under law or equity to collect said amounts with a ten (10) day prior written notice, including, but not limited to, enforcing its security interest, accelerating the payment of and declaring immediately due and payable any unpaid balance of the order, referral to outside collection agencies and/or commencement of legal action. MRP’s rights shall be cumulative, and it shall not be required to have attempted to realize upon to the Equipment before taking any other collection actions. MRP may require that Buyer assemble and return any or all of the Equipment to MRP and, in the event Buyer fails to return such Equipment peaceably, enter upon the premises where such Equipment is located, with or without legal process, and repossess such Equipment. Upon a Default, Buyer agrees to pay upon MRP’s demand: (i) all costs and expenses incurred by MRP or its assignee in connection with the enforcement of any remedies, including all expenses incurred in connection with the return, sale, release or other disposition of the Equipment, including attorneys’ fees and other costs incurred by MRP or its assignee in enforcing or defending its rights and remedies under this Agreement and any other written agreement between Buyer and MRP.

        18.  COMPLIANCE WITH LAWS. Buyer shall (a) carry out the transactions contemplated by this sale and deal with the Equipment in conformity with all applicable laws, rules and regulations of all government authorities, including, without limitation, export laws, (b) obtain all permits and licenses required in connection with the purchase, shipment, installation or use of the Equipment, and (c) be solely responsible to fully understand and comply with laws, rules and regulations. Any information provided is as a convenience only.

        19.  FURTHER ASSURANCES. Upon MRP’s reasonable request, Buyer shall, at its sole cost and expense, execute and deliver all such further documents and instruments, and take all such further acts, necessary to give full effect to this Agreement.

        20.  ASSIGNMENT; SUCCESSORS AND ASSIGNS. Buyer cannot delegate any duties nor assign any rights or claims under this Agreement without MRP’s prior written consent, and any such attempt or assignment shall be void. In the event that Buyer finances its acquisition of any Equipment with a third party, Buyer may direct MRP to transfer title of such Equipment to such third-party financing company, with all remaining terms and conditions of this Agreement remaining in full force and effect. This Agreement is binding on and inures to the benefit of the parties to this Agreement and their respective permitted successors and permitted assigns.

        21.  NO THIRD-PARTY BENEFICIARIES. Subject to Section 16, this Agreement benefits solely the parties to this Agreement and their respective permitted successors and assigns, and nothing in this Agreement, express or implied, confers on any other person any legal or equitable right, benefit, or remedy of any nature whatsoever under or by reason of this Agreement.

        22.  GOVERNING LAW; VENUE. The application of the UN Convention on Contracts for the International Sale of Goods is expressly excluded. The parties agree that any and all claims, demands, disagreements, controversies or disputes arising out of or relating to this Agreement and any agreement or document delivered in connection herewith (collectively, “Claims”) shall be governed by and construed in accordance with the laws of the State of Utah and adjudicated exclusively in the state and federal courts located in or nearest to Summit County, Utah, which courts shall have the sole and exclusive jurisdiction and venue for adjudication of all Claims. The parties hereby agree upon, consent and stipulate to the jurisdiction and venue of the aforementioned courts for the adjudication of all Claims, to the exclusion of all other courts, forums and venues whatsoever.

        23.  NON-DISPARAGEMENT. Buyer shall not disparage MRP or MRP’s trademarks, websites, products or services, or display any such items in a derogatory or negative manner on any website or in any public forum or press release.

        24.  NOTICES. Any notice, demand, or communication required, permitted or desired to be given hereunder shall be deemed effectively given when personally delivered, when sent by electronic means, when received by overnight courier, or when mailed by prepaid, certified or registered mail, return receipt requested, addressed to the other party at its address set forth on the Quote or to such other address that the receiving party may designate from time to time in accordance with this Section 25.

        25.  PUBLIC ANNOUNCEMENTS. Unless otherwise stated herein, neither party shall issue a press release or otherwise advertise, make a public statement or disclose to any third-party information pertaining to the relationship arising under this Agreement, the existence or terms of this Agreement, the underlying transactions between MRP and Buyer or agent for Buyer or refer to the other party in relation to this Agreement without the other party’s prior written approval.

        26.  ENTIRE AGREEMENT; ADDITIONAL OR INCONSISTENT TERMS. Subject to Section 32, this Agreement constitutes the sole and entire agreement between the parties hereto relating to the subject matter hereof, and any unincorporated representation, affirmation of fact, course of prior dealings, promise or condition in connection therewith, or usage of the trade, shall not be binding on either party. Terms and conditions set forth which differ from, conflict with or are not included in this Agreement shall not be part of any agreement between MRP and Buyer unless both parties specifically accept such terms and conditions in writing.

        27.  WAIVER. No waiver under this Agreement is effective unless it is in writing and signed by the party waiving its right. Any waiver authorized on one occasion is effective only in that instance and only for the purpose stated and does not operate as a waiver on any future occasion. None of the following constitutes a waiver or estoppel of any right, remedy, power, privilege or condition arising from this Agreement: any failure or delay in exercising any right, remedy, power or privilege or in enforcing any condition under this Agreement; or any act, omission or course of dealing between the parties.

        28.  SURVIVAL. Subject to the limitations and other provisions of this Agreement, the representations and warranties of Buyer contained herein shall survive the expiration or earlier termination of this Agreement for a period of twelve (12) months after such expiration o termination and (b) this Section 29 and Sections 10, 12, 13, 14, 15, 16, 17, 21, 22, 23, 24, 26, and 32 of this Agreement, as well as any other provision that, in order to give proper effect to its intent, should survive such expiration or termination, shall survive the expiration or earlier termination of this Agreement. All other provisions of this Agreement shall not survive the expiration or earlier termination of this Agreement.

        29.  RELATIONSHIP OF PARTIES. Nothing in this Agreement creates any agency, joint venture, partnership or other form of joint enterprise, employment or fiduciary relationship between the parties. Neither party has any express or implied right or authority to assume or create any obligations on behalf of or in the name of the other party or to bind the other party to any contract, agreement or undertaking with any third party.

        30.  HEADINGS. The headings in this Agreement are for reference only and do not affect the interpretation of this Agreement.

        31.  ORDER OF PRECEDENCE. In the event of conflict between the Quote, a written agreement by MRP, and these Terms, the order of priority shall be: (1) the written

agreement by MRP, if only if executed by an MRP Officer, (2) the Quote and (3) these Terms, and only to the extent of the direct conflict. Notwithstanding the foregoing, MRP shall not be bound by, and specifically objects to, any terms, conditions or other provisions, both written and oral, which are different from, in addition to or inconsistent with the provisions of this Agreement which are set forth in any purchase order, receipt, acceptance, confirmation, correspondence or otherwise of, or by, Buyer. Fulfillment of Buyer’s order shall not constitute acceptance of any of Buyer’s terms and conditions and does not serve to modify or amend the terms and conditions contained herein.

        32.  SEVERABILITY. If any part of this Agreement is held to be void, illegal or unenforceable, then it shall be deemed to be severed from this Agreement and the remaining provisions shall continue in full force and effect; provided, however, that if any fundamental term or provision of this Agreement is held to be void, illegal or unenforceable, the remainder of this Agreement shall be unenforceable. Upon a determination that any term or provision is void, illegal or unenforceable, the parties shall negotiate in good faith to modify this Agreement to effect the original intent of the parties as closely as possible in order that the transactions contemplated hereby be consummated as originally contemplated to the greatest extent possible.